Product Type:
Wall sander, ceiling sander, long-neck sander
with suction device
Areas of Application:
for example
- to relieve the musculoskeletal system
- to relieve the respiratory system
Description:
During conventional sanding of surfaces on floors, ceilings and walls, the worker is subjected to considerable stresses due to overhead or bent-over work. in a stooped position. The long-neck sander reduces these stresses.
Ceilings and surfaces 3 m high can be reached without ladders or scaffolding. The long-neck sander significantly reduces work above shoulder height, thus reducing stress on the shoulder-arm system. When working on the floor and in lower wall areas, stooped, squatting and kneeling postures are eliminated. Dust nuisance during overhead work is significantly reduced. The extraction unit can also be connected to industrial vacuum cleaners.
Features / Components:
- Electronics: with constant speed control, soft start, overload protection, speed preselection with adjusting wheel
- Handling: light, low fatigue, ergonomic, optimum balance between motor and grinding head
- Power transmission: flexible drive shaft, "flex technology" reduces weight on the head
- Grinding head: gimbal-mounted
- Suction: between brush rim and sanding disc, prevents clogging with abrasive, for dust-free work
- Connection option for FLEX safety vacuum with the FLEX clip system on the guide tube
- Guide tube: Aluminum, guide handle optional
- On/off switch: dust protected
Technical Data:
Grinding wheel diameter: 225 mm
Angle of inclination at head: 100 degrees
Length: 1520 mm
Power consumption: 500 W
Power output: 270 W
Idle speed: 1100-1650 /min
Cable length: 5.0 m
Weight: 3.9 kg
Price (without guarantee):
The price is available on request from the manufacturer / distributor.
