Product Type:
Kerbstone Laying Device
Areas of Application:
for example, to relieve the musculoskeletal system
Description:
Kerbstones made of granite or concrete, which have a very high dead weight, are laid for roadside stabilization. Even today, the kerbstones are mainly laid by hand or with the aid of setting tongs. With these methods, the heavy curb is still lifted manually and placed in the concrete bed. The use of vacuum kerbstone placement equipment or hydraulic kerbstone grippers reduces these physically demanding activities.
Due to the almost strain-free placing, setting down and moving of the curbs, severely stooped postures under load are avoided. In addition to a considerable reduction in general physical exertion, the spine and hand-arm system in particular are relieved.
The exemplary vacuum curb laying device is suitable as an attachment to all types of wheel loaders with fork carriage plate. The Jumbo BV is flange-mounted to the fork carriage plate with claws and is equipped with its own adjustable fork tines.
The manufacturer Probst Greiftechnik also offers a hydraulic curb relocation clamp.
Kerbstone installation equipment is subsidized by BG BAU as part of the occupational health and safety bonus.
Features / components:
Vacuum components:
- Combustion engine resp. Hydraulic motor and blower unit with silencer and dust filter
- Feed hose and lifting hose
- Valve unit and operating handle
- Kerbstone gripper with low-wear sponge rubber profile, also suitable for natural kerbs
- All components replaceable via quick-release fasteners
Column-mounted slewing crane:
- Inclination transverse to direction of travel: hydraulic, vertical transverse to direction of travel, with hand pump
- inclination in direction of travel: via tilting cylinder of loading bucket
- mast: hydraulic, foldable
- safety device: SKVA articulated sliding boom with "SAFESTOP"
suction plate:
- incl. Curb suction plate ESP 150 (load capacity 150 kg)
Technical Data:
outreach: 3500 mm
lifting height from level of forks: up to approx. 1.1 m
slewing range of crane arm: approx. 270 degrees
clear height of crane mast: approx. 2800 mm
laying length: 7.000 mm
Back pressure: max. 10 bar
Nominal pressure: min. 200 bar
Load capacity: 150 kg
Dead weight: 490 kg (with hydraulic drive)
520 / 540 kg (with combustion engine)
Price (without guarantee):
The price is available on request from the manufacturer / distributor.
