Heymer -DuSi

Product Type:
Swivel shower seat for shower trays

Description:
The shower seat is manufactured for shower tray dimensions and placed on the edge of the shower tray. It is not drilled or glued. It can be dismantled into two parts and removed from the shower at any time.

The seat of the Heymer -DuSi can be rotated and moved as required within the shower so that you can adopt the correct position for showering.

The Heymer -DuSi is manufactured in 3 different versions, depending on the external shower tray height, so that the desired seat height can be achieved. In the standard form for shower bases up to 28 cm external height, there are still vertical tubes between the support tubes and the slide.

Shower base from 28 cm to 35 cm external height:
The Heymer -DuSi is built in 3 different versions, depending on the external shower base height (Z), so that the desired seat height (H) is achieved. Due to the relatively high shower bases, the vertical pipes are omitted and the support pipes are located directly under the slide. A special form for shower base heights between 28 cm and 35 cm

Shower base over 36 cm external height:
The Heymer -DuSi is built in 3 different versions, depending on the external shower base height (Z), so that the desired seat height (H) is achieved. For shower bases with an external height of over 36 cm, the support tubes are positioned above the slide tubes. This means that the shower seat cannot be placed right up to the front edge. The width of the shower base edge at the front and rear is essential for the measurement.

Dimensions required for manufacture:
To manufacture the Heymer -DuSi, the supplier requires 4 dimensions:
- the inner width X of the shower base between the side walls
- the inner dimension Y of the shower base between the shower door and
- rear wall: the outer height Z of the shower base
- the desired seat height H

Price (without guarantee):
EUR 1,750.00 plus VAT
Final consumer price